Products About News Case DownLoad service Join us Contact Us

News 

News

ZEROSPAN--Heatsoft Electrothermal Regulator Application Notes

Publish Date 2019-03-06
Heatsoft is used to control the heating power of the heater to make the temperature of the device more stable and to extend the life of the heater.
It uses Thytister as the main control element, no contact, no noise, and can adjust heating power very smoothly, and its selected Thyrister component
It is used under normal conditions and has a long life and a semi-permanent life. It is the most widely used and most sophisticated electrothermal power regulator.

Heatsoft often uses 1.PID temperature controller (TIC) 2. Computer temperature control system (PC/PLC, etc.) to achieve the constant temperature and temperature rise curve of the device as expected.. Of course, you can also use only the manual of Heatsoft itself. Adjust the function to adjust the heating power of the heating element of the device.

Heatsoft's use occasions such as heat treatment furnace, constant temperature air conditioning control, injection machine, extrusion machine, hot air blower, oven, paint oven, high temperature sintering furnace, etc., can optimize the temperature stability of the equipment. Improve product quality.

Before the use of Heatsoft, the designer should fully understand the characteristics of the heating element in order to make the highest effect of Heatsoft. The wrong choice may cause poor control or damage.
When installing a transformer, it is necessary to reserve the heating element to aging and raise the voltage tap.
Application
General electric furnace, baking furnace, heat treatment furnace, water temperature heating, constant temperature air conditioner, injection machine vacuum furnace, red line lamp surface fast baking equipment high temperature sintering furnace, high temperature experimental furnace, high temperature heat treatment furnace, salt bath electrode furnace, high temperature Heat treatment furnace, transformer load
 If the rated voltage of each type of heating element does not match the main power supply voltage, it is often necessary to change the voltage through the transformer. When Heatsoft controls the transformer, the phase inductive control type must be selected.



Products  |  About  |  News  |  Case  |  DownLoad  |  service  |  Join us  |  Contact Us  |  Sitemap  |  Mobile Version
  繁體版     English     简体版
Powered by DIYTrade.com
HomeContact UsSitemap